WATTS® Pressure Regulator, 3-Way Small, Series: LF263A, 1/2 in Nominal, FNPT End Style, 300 psi Pressure, 0 to 140 deg F, Media: Water, T-Handle Actuator, 2-1/8 in Inlet to Outlet Length, Brass Body, Buna-N Stainless Steel Trim, 4-3/8 in H Dimensions, Domestic
This 1/2 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, three-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 1 to 25 psi (0.1 to 1.7 bar) and is factory set at 10 psi (0.7 bar).
ANSI/NSF 61-G|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Actuator Type
T-Handle
Body Material
Brass
Dimensions
4-3/8 in H
Domestic/Import
Domestic
End Style
FNPT
Inlet to Outlet Length
2-1/8 in
Media
Water
Nominal Size
1/2 in
Pressure Rating
300 psi
Series
LF263A
Temperature Rating
0 to 140 deg F
Trim Material
Buna-N Stainless Steel
Type
3-Way Small
Brand
WATTS®
Country of Origin
US
Warranty
Limited
Tee handle adjustmentNPT threaded female inlet and outlet connectionsMaximum working pressure is 300 psi (21 bar)Oversized orificeRugged, forged lead-free brass bodyThe wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weightTemperature range is 0 to 140 deg F (-18 to 60 deg C)